Features

With a strong penetrating effect which lifts the dirt.

An anti-corrosion additive reduces the risk of rust, which is typical of most water-based cleaners.

Why use HP Clean?

• Cleaning of all surfaces: walls, floors, plastics, stone, wood, etc.
• Cleaning of all vehicles (inside and outside): car, motorbike, caravan, boat, etc.
• Cleaning of heavily soiled textiles.
• Solvent-free degreasing of work pieces prior to bonding, sealing, welding, coating, etc.

Instructions

Cleaning and degreasing with normal soiling

• Apply HP Clean to the dirt or grime (always from below to above).
• Rub in, rinse with water and rub dry.

Cleaning and degreasing if heavily soiled

• Apply HP Clean to the surface and allow to work in for +/- 5 minutes (depending on the degree of soiling).
• When applied to vertical surfaces we recommend working from the bottom up.
• In case of heavy soiling and porous surfaces, scour with a semi-hard brush.
• Afterwards rinse with clean water.
• Repeat if necessary.

As a strong in-depth cleaner (e.g. oil stain in concrete)

• Squirt Tec7 Cleaner on oil stain and allow to work in for min. 5 minutes.
• Scour lightly with semi-hard brush and once again squirt with Tec7 Cleaner.
• Allow to work in for a minimum of 5 minutes.
• Now apply copious amount of HP Clean to the soiling and allow it to work in for a minimum of 5 minutes.
• Scour lightly with semi-hard brush.
• Once again apply HP Clean to the soiling and allow to work in.
• Remove the dirty soap residues with clean water using a garden hose, or even better a highpressure cleaner.
• If necessary, this treatment may be repeated.